A Door Installation?

If you are reading this article most likely you are trying to find a way to replace your door but have no idea how to. Well, replacing a door is actually quite easy especially if it is a front door which absolutely can change your house aesthetically.

However, before you start doing a project for your own house, read this full article below so you can decide whether you can do it alone or end up thinking of getting help from professionals – just in case you are gonna break the door.

Know-How

Before breaking your door when you try to install it, take note that everything you do must have a basic knowledge of it. Even if door installation doesn’t seem like a difficult task for you, some basic carpentry knowledge is required to finish installing the door correctly and efficiently. Many steps must be taken to guarantee that the door functions correctly, the seals tightly to save energy and that no water leaks into your home. A professional like Locksmith Services who has installed a large number of exterior doors will have the knowledge and skills to deal with any unnecessary problems that could happen.

As a professional, Locksmith Services are familiar with fixing and installing a door. Not only do they stop at that, but they also have an Amplimesh Door that will add security to your house.

Amplimesh Door

A security door that over the last fifty years has been trusted by so many Australians that also has a security screen door like SupaScreen. You can tailor this door by yourself or even ask for a professional to help you with the door installation.Slab Door
A slab door is nothing more than a door. Slab doors do not come with handles, hinges, or holes; these must be made by the installer, and hardware must be purchased. A pre-existing door frame must be used, or a new one must be built, to which the door will be attached.

A slab door is not recommended for new construction or if the previous door frame is damaged, because the installation will be difficult.

Pre-Hung Exterior Doors
A pre-hung door is already installed on a new door frame. For standard installations, the hinges have been installed, and the lockset and deadbolt holes have already been drilled. A pre-hung door is significantly heavier than a slab door, and it may require more than one person to lift and hold it.

Time
Remember that many DIY projects take longer than expected. If this is intended to be a one-day project, be aware that it may take longer than expected and plan accordingly. A professional can complete an exterior door installation in a matter of hours, whereas a homeowner who has never done this type of work before may need up to a weekend.

Equipment

You probably have a lot of tools if you do a lot of DIY projects. Keep in mind that if you don’t, you might end up paying for more than buying your door when all is said and done, which will increase the time and cost of the door installation. The following are some of the tools and materials needed for the job:

• Measuring tape
• Pry bar
• Razor knife
• Rust-proof trim screws
• Caulk
• Sill pan flashing kit
• Hammer
• Screwdriver
• Saw
• Drill
• Spirit level
• Hardware
• Paint and primer

Consider the additional cost if you do not already have these supplies on hand.

Expense

For the average homeowner, installing an exterior door can be an expensive project. Before you decide to tackle this project on your own, hiring a professional to help you could potentially be cheaper. Do not hesitate to contact Locksmith Services to fix your door problems.